Configurations; Factory Settings (Default) - Intelbras TIP 200 LITE Installation Manual

3. Connect the Internet port of the IP telephone to your network equipment
via the Ethernet cable and the power supply in the DC5V* socket, according
to the following figure:
* Eliminates the need to use an external power supply in TIP 200 and TIP 200 S, if your network
4. The IP telephone can also share a connection with other network devices,
such as a PC. In order to do this, connect the LAN (PC port) of the IP te-
lephone to the network interface of the computer, via an Ethernet cable,
according to the following figure:
PC
5. After installation, follow the directions in the Configurations sections.

Configurations

Factory settings (default)

The product comes from the factory with the following network settings:
• WAN Interface (Internet Port): DHCP client (receives network IP).
• LAN Interface (PC Port): Bridge mode.
38
Switch
equipment supports PoE technology.