Technical Specifications - Intelbras TIP 200 Installation Manual

1. Technical specifications

WAN Interface (internet)
LAN Interface (PC)
Network Protocol
Codecs
Power supply
Power consumption
Dimensions
Weight
Operating temperatures
Operating humidity range
Storage humidity range
Only the TIP 200 and TIP 200 S support PoE technology and follow IEEE802.3af norms.
1
The G722 codec (wideband) is responsible for the HD voice. However, in order to achieve HD
2
voice, the PABX must also support this codec.
Attention: this device uses VoIP (Voice over IP) technology, and the quality of its
functioning depends on the amount of traffic and the prioritization of the network
to which the product is connected. In the event of abnormalities in the calls made,
such as audio problems, check your network status
Consult your VoIP provider about which codec (voice coder/decoder) to use and
about the settings necessary for the TIP 200 LITE / TIP 200 / TIP 200 S IP telephone
in order to achieve the best voice quality.
The TIP 200 S model is designed for specific use in some PBX models. For further
information, refer to Intelbras through telephone number +55 48 2106 0006.
Should there be any doubt, please access www.intelbras.com.
38
10/100BASE-T 1 x RJ45 with PoE
10/100BASE-T 1 x RJ45
SIP v1 (RFC 2543), v2 (RFC 3261)
G722 (wideband) , G711 µ/A, G723, G726, G729AB,
2
GSM and iLBC
Input: 100-240 VAC, 50-60 Hz
Output: 5 VDC , 1,2 A
1.4-2.6 W
195 x 150 x 152 mm
770 g
0 ºC to 60 ºC
10% to 95%
5% to 90%
1
with your VoIP service provider.