Rheem *HC-TST305UNMS Series Quick Setup Manual page 5

SYSTEM/REMOTE SENSOR CONFIGURATION
7.
The default is Remote OFF for (remote
sensor disabled). If no change is required,
then press once to move to the next
Menu Reference number; otherwise, use the
touch keys to select Remote On
or
(enables the remote sensor).
8.
Press once to move to Menu sub-
selection for setting remote sensor location.
The default is Remote In (Indoor remote
touch keys if Outdoor
sensor). Use or
Remote (Outdoor remote sensor) is desired.
9.
once. If Remote In sub-selection
Press
will change to choose local sensor. Default
is Ls On – Local sensor enabled. Use
touch keys to change to LS OFF – Local
sensor disabled.
NOTES
A. Menu selection will skip Dual Fuel setup if Menu Reference number 1 was not changed to HP1 or HP2. If HP1 or HP2 was selected, then Menu selection
for Dual Fuel using software logic or Dual Fuel using outdoor remote sensor will appear on the display depending on the remote sensor selection.
B. Press touch key to exit the Installer Configuration Menu.
default
default
or
or
default
or
Dual Fuel (dF) feature using
software logic (see next page)
Quick Set-Up Guide for Touchscreen Thermostat
Menu remote sensor has sub-selections
that will appear if installer selects the
Remote (On) setting.
or
Selecting this setting
will enable Dual Fuel
(dF) feature using
outdoor remote sensor
(see page 5)
3