Video Analytics; Table 4-6 White Balance Settings - Honeywell HD4MDIH User Manual

Video Analytics

Document 800-07496 Rev A
12/10
HD4MDIH/X EQUIP Series True Day/Night Rugged IP Network Camera User Guide
Note You must click Apply after you make changes to any settings to save those
changes. Settings are not saved unless you click Apply.
Table 4-6 White Balance Settings
Option
AWC Auto (Auto White
Balance Control Mode)
MWB (Manual Mode)
AWC Push (Auto White
Balance Control Mode)
Your HD4MDIH/X camera can be configured to detect camera sabotage and motion within
a scene via the Video Analytics view (see
user to set the tamper detection threshold settings for blur, blinding and scene changes.
Description
An automatic white balance mode that can be used in
scenes which have constant lighting. The user can optimize
WB for the given scene by pressing and holding an
adjustment button.
Manual white balance mode. Set the Red and Blue gains
from 0–255.
Automatically adjust the white balance to your specific
environment. When selected, the white balance is locked.
Note This setting is recommended for situations in which
the light conditions are constant, so that the
specified color temperature does not change.
Figure 4-11). The Video Analytics tab enables a
59