Figure 4-9 Video Codec Settings - Honeywell HD4MDIH User Manual

Setting Options
Select this Priority
field setting
Quality
(see Figure
Bit Rate
(see Figure
Compression Minimum, Low,
Ratio Medium, High,
Maximum
Target Bit 250 – 6000 kbps
Rate (kbps)
GOP (No. of 1– 50
Frames)
Document 800-07496 Rev A
12/10
HD4MDIH/X EQUIP Series True Day/Night Rugged IP Network Camera User Guide
Table 4-4 Compression Settings(cont'd)
Description
Field Setting
Maximum Bit Rate
4-9) The Target Bit Rate field
is grayed out.
Target Bit Rate and
Maximum Bit Rate
4-9)
Maximum Bit Rate and
Compression Ratio fields
are grayed out.
When Quality is selected as the Priority, select the Compression Ratio.
Minimum is the highest visual quality; Maximum is the lowest visual quality.
Enter the Target Bit Rate in kbps (kilobits per second) which represents the
amount of data processed per second.
Select the GOP (Group of pictures) number from 1 to 50. (Not available on the
Secondary Stream.)
Figure 4-9 Video Codec Settings
Statistics are received
for the current image in
real time when
Received is enabled.
Description
If the actual bit rate (use statistics to determine)
from the camera momentarily exceeds the
maximum bit rate (MBR), the camera will maintain
the actual frames per second.
Set the target bit rate accordingly. If the actual bit
rate (use statistics to determine) from the camera
momentarily exceeds the target rate, the camera
will maintain target bit rate by adjusting the image
quality, and then reducing the actual frames per
second if necessary.
Set the Resolution for
NTSC or PAL video signals.
55