HP AdvanceStack J2610B Installation And Reference Manual page 63

hub operation
auto-partitioning, 3-5
collision detection, 3-5
link beat, 3-6
verifying, 1-5
Hub-8U
ThinLAN connections, 1-11
hub-to-hub network connections
using the ThinLAN port, 1-14
with the MDI switch, 1-10
I
IEEE 802.3 Type 10Base-T standard, iii
included parts, 1-2
installation problems, 2-6
installing the hub
equipment needed, 1-7
mounting procedures, 1-7, C-2
network connections, 1-9
out-of-band management connections, 1-14
summary of steps, 1-2
verifying hub operation, 1-5
wall mounting, 1-7
Internet
obtaining latest drivers from, 2-12
obtaining software from, 2-11
L
LAN adapter cards
to test end-to-end communications, 2-9
LEDs
Activity, 3-2
AUI/Xcvr, 3-3
Collision, 3-2
diagnosing the hub status, 2-3
pattern during self test, 2-3
patterns showing error conditions, 2-4
Power, 3-2
twisted-pair ports, 3-3
verifying hub operation, 1-6
link beat
description, 3-6
list
included parts, 1-2
M
management slot, 3-4
managing the hub, 1-14
MDI switch, using, 1-10
MDI-X switch, using, 1-10
mounting brackets
ordering, 1-8
mounting the hub, 1-7
precautions, 1-7
under a desk, 1-8
wall mounting, 1-7
N
Network backbones, 1-12
network connections
hub-to-hub connections, 1-10
port connections, 1-9
network management, v
non-standard cables, 2-7
O
operation of the hub
description, 3-5
out-of-band management
connecting to the hub, 1-14
P
partitioning
automatic partitioning of ports, 3-5
parts list, 1-2
physical specifications of hubs, B-2
port LEDs
twisted-pair, 3-3
ports
connection procedures, 1-9
power
LED pattern during, 2-3
Precautions, 1-3, 1-5
Power LED, 3-2
precautions for mounting the hub, 1-7
procedures
hub installation, 1-2
network connections to the hub, 1-9
network port connections , 1-9
wall mounting the hub, 1-7
Index
Index-3