Twisted-Pair Cable/Connector Pin-Outs; Twisted-Pair Cable For Hub-To-Computer Network Connection - HP AdvanceStack J2610B Installation And Reference Manual

Cables and Connectors
Twisted-Pair Cable/Connector
Pin-Outs
Twisted-Pair Cable for Hub-to-Computer
Network Connection
To connect PCs or other network devices to the hub, use a "straight-through"
10Base-T cable. The twisted-pair wires must be twisted through the entire
length of the cable. The wiring sequence must conform to AT&T 258A (not
USOC). See "Twisted-Pair Cable Pin Assignments" later in this chapter for a
listing of the signals used on each pin.
Straight-through cable
white/orange
orange/white
white/green
green/white
N o t e
Pins 1 and 2 must be a twisted pair.
Pins 3 and 6 must be a twisted pair.
Pins 4, 5, 7, and 8 are not used in this application, although they may be
wired in the cable.
A-3