Thinlan Connections - HP AdvanceStack J2610B Installation And Reference Manual

In the following illustration, the first hub is connected to two end nodes and
to a second hub.

ThinLAN Connections

With an HP ThinLAN Transceiver Module for 10Base-2 networks, you can
connect your hub to a thinLAN network. The following illustration shows a
hub with an HP ThinLAN Transceiver Module connected to a ThinLAN
backbone.
50-ohm terminator
Up to 100 meters
PC attached to Port 1:
switch in MDI-X position
and straight-through
cable is used.
HP J2608A ThinLAN
Transceiver Module installed
in the AUI/Xcvr Slot
thin coax cable
Installing the Hub
Hub attached to Port 1:
switch in MDI position and
straight-through cable is used.
1-11