Install Add-In Modules (Optional) - HP AdvanceStack J2610B Installation And Reference Manual

Installing the Hub

1. Install add-in modules (optional)

The HP AdvanceStack Hub-8U can be custom-configured by installing the
optional HP AdvanceStack 8U/16U SNMP Module and/or an HP Transceiver
Module. If you intend to install any of these optional modules, refer to the
documentation that was shipped with it.
It may be more convenient to install these optional modules before installing
the hub under a desk or other location. Inspect your installation site and
identify whether the hub's module slots will be accessible.
The HP J3133A AdvanceStack 8U/16U SNMP Module enables you to connect
a PC to the hub to configure, monitor, and troubleshoot the hub.
C a u t i o n
To avoid possible damage to module or transceiver circuitry,
disconnect the power cable from the hub before installing (or
removing) the optional SNMP Module or a transceiver.
1-3