Samsung SCC-B2303(P) User Manual page 19

❿ MIRROR : Horizontally flips the video signal.
❿ POSI/NEGA : Outputs the video brightness signal normally or reversely.
❿ DETAIL : Adjusts the horizontal and vertical sharpness.
E
❿¤MOTION DET
MOTION DET detects any movement of objects. if you activate the
MOTION DET function at the time when you expect nobody to move, the
function will detect the movement of an intruder Once detected, the
function outputs the ALARM signal. The MOTION DET function detects
any movement and selects the movement sensitivity and the area to
detect the movement. If you select the ON... mode and press the
[ENTER] key, the MOTION DET submenu screen will appear.
❿¤LANGUAGE : You can choose one of the following languages: English,
German, French, Spanish, and Italian.
(SPECIAL)
BAUD RATE 38400
D-ZOOM OFF
PIP ---
MIRROR OFF
POSI/NEGA +
DETAIL (0)---I--
MOTION DET ON...
LANGUAGE ENGLISH
RET
(SPECIAL)
BAUD RATE 38400
D-ZOOM OFF
PIP ---
MIRROR OFF
POSI/NEGA +
DETAIL (0)---I--
MOTION DET OFF
LANGUAGE ENGLISH
RET
36
(MOTION DET)
Press
[ENTERt]
Key
AREA USER...
SENSITIVITY L---I---H
RET
(SPECIAL)
BAUD RATE 38400
D-ZOOM AUS
BIB ---
SPIEGEL AUS
Use the
POSI/NEGA +
[Left/Right]
DETAIL ( 0)----I--
Key AKTIVITAET AUS
SPRACHE DEUTSCH
RET
The AREA menu sets size and position like AREA in the BLC menu. If you
want to select the screen area where the MOTION DET function is applied,
you should press the [ENTER] key in the AREA USER.. by yourself or set
the AREA menu to the PRESET.. Then, the MOTION DET function will be
applied to the selected area of the product during shipment. You can also
move the cursor to the SENSITIVITY menu and press the LEFT or RIGHT
key to set up the detectability of the selected area movement.
(MOTION DET)
press the
[ENTER] key
AREA USER...
SENSITIVITY L---I---H
RET
SIZE..
œ
➛ ❿
[ENTER] key
❷
POSITION..
SIZE..
œ
➛ ❿
❷
POSITION..
SIZE
œ
Use the
❷
➛ ❿
POSITION..
E
37