Panasonic KX-TG2343C Operating Instructions Manual page 53

PQQX14037ZA.book 53 ページ ２００４年２月１９日 木曜日 午後４時５８分
For Call Display service users (p. 30)
During playback using the handset, the handset display will show the name
and/or number of the caller whose message is being played.
To call back the displayed number:
1. During playback, press [MENU].
2. Press Call, [C] or [s].
• The unit stops playback and dials the phone number.
• If you need to edit the phone number to call back, see page 33.
During playback
To adjust the
speaker volume
To repeat a
message
To skip a message
To stop playback
Listening to Messages
Helen
555-777-8888
Repeat
K
Helen
555-777-8888
Edit
K
Base Unit Handset
Base unit: To increase volume, press VOLUME [>].
To decrease volume, press
VOLUME [<].
Handset: To increase volume, press [B].
To decrease volume, press [d].
• You can also adjust the receiver volume on the handset.
Base unit: Press [REPEAT].
Handset: Press Repeat or [1].
• If pressed within the first 5 seconds of playback, the
previous message will be played.
Base unit: Press [SKIP].
Handset: Press Skip or [2].
Base unit: Press [STOP].
• To resume playback, press [MESSAGE].
• If you do not press any buttons for 60 seconds or if you
press [STOP] again, playback mode will be cancelled.
Handset: Press [9].
• If you do not press any buttons within 15 seconds after
stopping playback, the voice menu will start (p. 52).
Skip
L
Call
L
53