Pc Control Codes; Cable Connection; Gravity Stack - NEC GT2150 User Manual

PC Control Codes

Function Code Data
POWER ON 02H 00H 00H 00H 00H 02H
POWER OFF 02H 01H 00H 00H 00H 03H
INPUT SELECT RGB 1 02H 03H 00H 00H 02H 01H 01H 09H
INPUT SELECT RGB 2 02H 03H 00H 00H 02H 01H 02H 0AH
INPUT SELECT VIDEO 1 02H 03H 00H 00H 02H 01H 06H 0EH
INPUT SELECT VIDEO 2 02H 03H 00H 00H 02H 01H 07H 0FH
INPUT SELECT S-VIDEO 02H 03H 00H 00H 02H 01H 0BH 13H
INPUT SELECT DVI (DIGITAL) 02H 03H 00H 00H 02H 01H 1AH 22H
PICTURE MUTE ON 02H 10H 00H 00H 00H 12H
PICTURE MUTE OFF 02H 11H 00H 00H 00H 13H
SOUND MUTE ON 02H 12H 00H 00H 00H 14H
SOUND MUTE OFF 02H 13H 00H 00H 00H 15H
ON SCREEN MUTE ON 02H 14H 00H 00H 00H 16H
ON SCREEN MUTE OFF 02H 15H 00H 00H 00H 17H
NOTE: Contact your local dealer for a full list of the PC Control Codes if needed.

Gravity Stack

Up to two units can be gravity stacked without external support. In some cases, however, two images will not align on the
screen correctly. This will become more apparent when displaying small text and detailed graphics.
1. Note : Gravity Stacking Two GT2150 Projectors
The optional lenses for GT2150 have different geometrical distortions in wide zoom and tele. Select the best zoom position for
stacking where the geometrical distortion is as small as possible. The recommended throw distances are as follows:
Screen Size Throw Distance
(Diagonal) GT19ZL
m inch
40" 1.7 66.9
60" 2.6 102.4
80" 3.5 137.8
100" 4.4 173.2
120" 5.3 208.7
150" 6.7 263.8
200" 8.9 350.4
240" 10.7 421.3
300" 13.4 527.6
350" - -
400" - -
450" - -
500" - -
• Lens position
Horizontal lens position must be as close to the center of the lens opening as possible.
2. Note: Gravity Stacking in link mode
A distribution amplifier is recommended for Gravity stacking in link mode to distribute one input source to two projectors.
3. Note: Gravity stacking in link mode without a distribution amplifier
In this configuration, horizontal position of each projector will need to be adjusted before enabling Link mode. This adjustment will
prevent image alignment.
GT13ZL GT34ZL
m inch m inch
1.0 39.4 - -
1.6 63.0 - -
2.1 82.7 6.7 263.8
2.7 106.3 8.4 330.7
3.2 126.0 10.1 397.6
4.0 157.5 12.6 496.1
5.4 212.6 16.8 661.4
6.4 252.0 20.2 795.3
8.1 318.9 25.2 992.1
- - 29.4 1157.5
- - 33.6 1322.8
- - 37.8 1488.2
- - 42.0 1653.5

Cable Connection

Communication Protocol
Baud rate:
Data length:
Parity:
Stop bit:
X on/off:
Communications
procedure:
OPTION (D-SUB 9P)
1
6
NOTE: Pins 1, 4, 6 and 9 are used inside the projector.
NOTE:: Jumper "Request to Send" and "Clear to Send" together on both ends
of the cable to simplify cable connection.
E – 63
38400 bps
8 bits
No parity
One bit
None
Full duplex
To TxD of PC
To RxD of PC
To GND of PC
2 3 4 5
7 8 9
To RTS of PC
To CTS of PC