List Of Direct Button Combinations - NEC GT2150 User Manual

List of Direct Button Combinations

CTL+ SOURCE (1-10)
CTL+ ENTER (While displaying Entry list)
CTL+CANCEL
CTL+ UNDO
CTL+ / / /
While using zoom on remote control:
CTL+ (BS)
CTL+MUTE OSD
SOURCE (1-10) in SW Level mode
CTL+ MENU (ADDRESS)
CTL+ IMAGE (PROJECTOR)
CTL+ POSITION (LENS)
CTL+ KEYSTONE (R)
CTL+ AMPLITUDE (G)
CTL+ ENTRY LIST (B)
CTL+ MAGNIFY (ZOOM)
CTL+ (FOCUS)
Switches to any selected signal found in the Entry List.
To enable this combination, you must first assign specific remote buttons for direct input
selection in the Entry Edit window.
Displays the Entry Edit Command window.
Returns to the previous menu without closing the slidebar or dialog.
Clears all menus or adjustment/setting screens. All adjustments are saved automatically.
Moves the slidebar or dialog box horizontally or vertically.
Displays the magnifying glass icon.
Deletes one letter or numeral in the entry screen.
Turns off the on-screen display forcefully.
Displays the Select switcher Input Slot window.
NOTE: This feature is available for SW 2 Level mode only.
When the SW 1 Level mode is selected, pressing Source button switches to the corresponding
slot without displaying the Select Slot window.
Displays the remote ID entry window.
Sequentially selects the Projector Options sub menu.
Displays the Lens Shift adjustment window.
Turns on red. Available only when the projector is in the test pattern mode.
Turns on green. Available only when the projector is in the test pattern mode.
Turns on blue. Available only when the projector is in the test pattern mode.
Pressing and holding down CTL and then ENTRY LIST buttons simultaneously, enters a
signal in the Entry List when you are not displaying a test pattern.
Zooms the lens in and out
Adjusts the lens focus.
E – 37