Panasonic KT9 Instruction Manual page 17

Input type (character indication) and range
K –200 to 1370 :
–199.9 to 400.0 :
J –200 to 1000 :
R 0 to 1760 :
S 0 to 1760 :
B 0 to 1820 :
E –200 to 800 :
T –199.9 to 400.0 :
N –200 to 1300 :
PL- 0 to 1390 :
C 0 to 2315 :
(W/Re5-26)
Pt100 –199.9 to 850.0 :
:
JPt100 –199.9 to 500.0
Pt100 –200 to 850 :
JPt100 –200 to 500 :
4 to 20mA DC –1999 to 9999:
0 to 20mA DC –1999 to 9999:
0 to 1V DC –1999 to 9999:
0 to 5V DC –1999 to 9999:
1 to 5V DC –1999 to 9999:
0 to 10V DC –1999 to 9999:
Press the
[Auxiliary function setting mode 2]
Input type • Make a selection with the
SV
PV
• Default value:
Selection
Scaling high limit • Set the value with the
PV SV
• Available for DC current, DC voltage input
Set value
Scaling low limit • Set the value with the
PV SV
• Available for DC current, DC voltage input
Set value
Decimal point place • Make a selection with the
SV
PV
• Available for DC current, DC voltage input
Selection
PV filter time
constant • Set the value with the
PV SV
Set value
OUT1 high limit • Set the value with the
PV SV
• Not available for ON/OFF action
Set value
OUT1 low limit • Set the value with the
PV SV
• Not available for ON/OFF action
Set value
OUT1 ON/OFF action
• Set the value with the
hysteresis
• Available for ON/OFF action
PV SV
Set value
OUT2 action mode • Make a selection with the
PV SV
• Available when Heat/Cool control (OUT2) is added
Selection
OUT2 high limit • Set the value with the
PV SV
• Available when Heat/Cool control (OUT2) is added
Set value
OUT2 low limit • Set the value with the
PV SV
• Available when Heat/Cool control (OUT2) is added
Set value
Overlap/Dead band
• Set the value with the
PV SV
Set value
• Available when Heat/Cool control (OUT2) is added
OUT2 ON/OFF action • Set the value with
hysteresis • Available when Heat/Cool control (OUT2) is added
PV SV
Set value
K –320 to 2500 :
–199.9 to 750.0 :
J –320 to 1800 :
R 0 to 3200 :
S 0 to 3200 :
B 0 to 3300 :
E –320 to 1500 :
T –199.9 to 750.0 :
N –320 to 2300 :
PL- 0 to 2500 :
:
C (W/Re5-26) 0 to 4200
Pt100 –199.9 to 999.9 :
JPt100 –199.9 to 900.0 :
Pt100 –300 to 1500 :
JPt100 –300 to 900 :
and keys for approx. 3sec.
,
, keys.
, keys.
,
, keys.
, keys.
, keys.
, keys.
,
, keys.
, keys.
, keys.
, keys.
Alarm type
High limit alarm: The alarm action is
if the input value reaches the high limit set value. Character indication:
Low limit alarm: The alarm action is
if the input value goes under the low limit set value. Character indication:
High/Low limits alarm: Combines High limit and Low limit alarm actions. When input value
reaches high limit set value or goes under the low limit set value, the alarm is
activated. Character indication:
High/Low limit range alarm: When input value is between the high limit set value and low
limit set value, the alarm is activated. Character indication:
Process alarm: Within the scale range of the controller, alarm action points can be set
at random and if the input reaches the randomly set action point, the alarm is
activated.
Character indication: Process high alarm
Alarm with standby function: When the power to the controller is turned on, even if the input
enters the alarm action range, the alarm is not activated. (If the controller is
allowed to keep running, once the input exceeds the alarm action point, the
standby function will be released.)
Character indication:
High limit alarm with standby
Low limit alarm with standby
High/Low limits alarm with standby :
A1 type
(1)
PV
A2 type
PV
keys.
A1 action Energized/
(2)
Deenergized setting
PV
A2 action Energized/
Deenergized
PV
keys.
A1 hysteresis
(3)
PV
A2 hysteresis
PV
A1 action delayed
(4)
timer
PV
A2 action delayed
timer
PV
Direct/Reverse control
PV
keys.
AT bias
PV
Setting item not used
PV
SV2 indication
PV
Output status selection
when input abnormal
PV
OUT/OFF key function
PV
Reverts to the PV/SV display.
17
deviation setting from the SV. The alarm is activated
deviation setting to the SV. The alarm is activated
, Process low alarm
:
:
• Make a selection with the
SV
• Default value:
Selection
• Make a selection with the
SV
• Available when A2 is added
Selection
• Make a selection with the
• Not available if
SV
type selection
Selection
• Make a selection with the
• Not available if
SV
type selection
Selection
• Set the value with the
• Not available if
SV
Set value
type selection
• Set the value with the
• Not available if
SV
Set value
type selection
• Set the value with the
• Not available if
SV type selection
Set value
• Set the value with the
• Not available if
type selection
SV
Set value
• Make a selection with the
SV
• Default value:
Selection
• Set the value with the
SV
• Available for thermocouple, RTD input
Set value
• Do not set this item even if
SV
on the PV display.
Set value
• Selects whether SV2 is indicated or not.
SV
• Default value:
Selection
• Make a selection with the
• Available only when input is DC current and DC
SV
voltage with DC current output.
Selection
• Make a selection with the
SV
Selection
, keys.
, keys.
, keys.
is selected during A1
, keys.
is selected during A2
, keys.
is selected during A1
, keys.
is selected during A2
, keys.
is selected during A1
, keys.
is selected during A2
, keys.
, keys.
is indicated
(Indication)
, keys.
, keys.