NEC UX5000 User Manual page 9

Intercom Calls To And From Co-Workers
To answer an Intercom call from a co-worker:
1. Do one of the following:
– If you hear a beep, speak toward your terminal or lift handset for privacy.
– If you hear Intercom ringing, press
To dial a co-worker over the Intercom:
1. Press
CALL1
2. Dial your co-worker's extension number.
– If you hear intercom ringing, wait for your co-worker to answer.
– If you hear two beeps, your call has voice-announced. Go ahead and speak.
– If you hear a single beep, your call has voice-announced but your co-worker has their
handsfree microphone muted (turned off).
3. (Optional) To make a voice-announced Intercom call ring, Dial
To call a co-worker using a Hotline Function Key:
1. (Optional: Lift handset) Press the Hotline Key.
– The Hotline Key is off when your co-worker is idle, on if busy, and flashing if in Do Not Disturb.
– See the Terminal Feature Handbook for more Function Key types you can set up.
If the co-worker you call is busy:
1. For Camp-On, dial
1. For Callback, dial
2. Wait for the system to call you back, then answer to have your call automatically go through.
– To cancel Callback, press
To Page a co-worker:
1. Press
CALL1.
2. Dial for All Call Page, or
*1 + 0
To leave a message for a co-worker:
1. Call your co-worker on the Intercom + Press your Programmed Voice Mail Function Key or Dial
To call your own mailbox:
1. Press your Programmed Voice Mail Function Key OR press
.
and wait on the line for them to become free.
2
and hang up.
2
+ Dial
CALL1
*1 + 1 through 8
or lift the handset.
SPK
.
1
OR
+ Hang up.
870
for page groups.
CALL1
+ Dial .
*8
.
8
9