Record A Call - Mitel 5140 User Manual

Record a Call

This feature uses your voice mail system to record your telephone
conversations.
Note: You may be required by law to inform the other party that you are
recording the conversation. For specific instructions, consult your System
Administrator.
To start recording while on a two-party call:
Press the Record Call command key.
Note: Your system may be programmed to automatically begin recording
external calls when you or the other answers.
To pause recording:
Press the Pause command key.
To resume recording after pausing:
Press the Resume command key.
To stop a recording without saving it:
Press the Stop&Erase command key.
To stop and save a recording:
Press the Stop&Save command key.
Putting the call on hold saves the recording; taking the call off hold starts a
new recording. Depending on system programming, hanging up, or pressing
Trans/Conf or a DSS/BLF key, may also save the recording.
To listen to a recording:
1. Lift the handset.
2. Access your voice mailbox.
3. Follow the prompts to retrieve the recording.
-27-