2X3 Crossover - dbx DriveRack User Manual
Complete equalization & loudspeaker control system
Hide thumbs
Also See for DriveRack:
- User manual (52 pages) ,
- Monitor application manual (32 pages) ,
- User manual (49 pages)
Table of Contents
Advertisement
DriveRack
Hardware
1.
2. Connect the outputs of the DriveRack™ PA and run to the selected speaker amplifier.
3. Make sure that the mixer and power amps are turned off prior to powering up the
Software
1. Use the Wizard to setup the specific program.
2. Once the program has been chosen, press the DATA wheel to load the program.
®
™
PA
Connect the outputs from the mixer to the inputs of the DriveRack™.
DriveRack™ PA.
Left
Mono Low
Application Guide
Right
Left High
EON15 G2
DriveRack™ PA User Manual
Section 5
5.4 - 2X3 Crossover
Right High
EON15 G2
MP4718S
Non-Powered
33
- Quick Links:
- System Setup and Gain Structure
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the DriveRack and is the answer not in the manual?
Questions and answers