Advertisement
AUTO1
Rotation Speed
The AUTO1
has three rotation speeds (Low, Medium and High), under
TM
normal conditions high speed is recommended when using the LR700
electronic receiver. If you are using the laser indoors visibly a slower rotation
speed may increase the visibility of the line produced.
Rotation speed is changed by pressing the speed button on the control panel
an LED light will indicate the selected speed, further presses of this button
wil toggle between the three available speeds.
Side Mount Plate
The Side Plate can be used in two ways; firstly as a wall mount in horizontal
levelling mode and secondly as a side mount for vertical rotation mode.
The plate clips onto the bar at the back of the AUTO1 laser and is removed
by pressing the attachment level.
OPERATING INSTRUCTIONS
TM
www.level1lasers.com.au
5
Advertisement
