NEC MultiSync LCD1850X User Manual page 15

6. To complete the setup of your MultiSync LCD monitor, use the
following OSM controls:
• Auto Adjust Contrast (Analog input only)
• Auto Adjust (Analog input only)
Refer to the Controls section of this User's Manual for a full description
of these OSM controls.
NOTE: If you have any problems, please refer to the Troubleshooting
section of this User's Manual.
NOTE: Refer to User's Manual in the NEC LCD Setup Software CD
case for installation and operation of this software.
Figure A.1
Macintosh Cable
Adapter (not included)
01b_English
Figure B.1
English-4
4
Figure A.2
Macintosh G3 and G4 do not
need a Macintosh cable adapter
2/4/01, 3:39 pm