Cleaning Upholstery - POLTI VT SMART_AIRPLUS Instruction Manual

7.1 Make sure that Chapter 1 has been followed
and connect the accessories as indicated in
Chapter 2.
7.2 Adjust the intensity of the steam by tur-
ning the adjustment knob (8); for this type of
surface we recommend Medium level of steam.
7.3 Ensure that the steam lock on the handle
is deactivated (5)-(6).
7.4 To clean windows and mirrors, steam the
surface thoroughly to dissolve the dirt. Apply
the window cleaner frame to the small brush
(14) and go back over the surface to eliminate
the dirt, without dispensing steam. The exten-
sion hoses can be connected to the handle to
reach high surfaces.
7.5 To clean tiles, attach the cap to the small
brush and pass over the surface, dispensing
steam, in order to eliminate the dirt. The ex-
tension hoses can be connected to the handle
to reach high surfaces.

8. CLEANING UPHOLSTERY

(mattresses, sofas, car interiors, etc.)
WARNING: Before cleaning leather or fa-
brics with steam, consult the manufacturer's
instructions and always carry out a test on a
hidden part or on a sample of the material.
Allow the steamed part to dry to make sure
that no changes in colour or deformations
have occurred.
8.1 Make sure that Chapter 1 has been followed
and connect the accessories as indicated in
Chapter 2.
8.2 Connect the small brush to the steam hose.
8.3 Attach the cap to the small brush.
8.4 Adjust the intensity of the steam by tur-
ning the adjustment knob (8); for this type of
surface we recommend Minimum level of
steam.
8.5 Ensure that the steam lock on the handle
is deactivated (4)-(5).
8.6 Press and hold the steam trigger on the
handle of the steam hose and pass over the
surface.
9. CLEANING BATHROOM FIXTU-
RES, GROUTING
WORKTOPS
9.1 Make sure that Chapter 1 has been followed
and connect the accessories as indicated in
Chapter 2.
AND KITCHEN
| 30 |
9.2 Adjust the intensity of the steam by turning
the adjustment knob (8); for this type of surface
we recommend Maximum level of steam.
9.3 Ensure that the steam lock on the handle
is deactivated (4)-(5).
9.4 Press and hold the steam trigger on the
handle and steam the surface thoroughly to
dissolve the dirt. Use a dry cloth to remove the
dirt dissolved by the steam. It is possible to
connect the accessory adapter and one of the
following accessories, recommended for remo-
ving encrusted dirt from very narrow surfaces,
to the flexible handle: steam concentrator,
small round brush, or large round brush.
The different coloured small round brushes
allow for a different colour to be used for ea-
ch surface or environment.
10. CLEANING FURNITURE AND DE-
LICATE SURFACES
WARNING: Before cleaning fabrics with
steam, consult the manufacturer's instruc-
tions and always carry out a test on a hidden
part or on a sample of the material.
10.1 Make sure that Chapter 1 has been fol-
lowed and connect the accessories as indica-
ted in Chapter 2.
10.2 Adjust the intensity of the steam by tur-
ning the adjustment knob (8); for this type of
surface we recommend Minimum level
of steam.
10.3 Press and hold the steam trigger on the
handle and direct the jet onto a cloth.
WARNING: Do not direct the steam jet di-
rectly onto surfaces.
10.4 Use the cloth previously steamed to
clean the surface, avoiding prolonged use on
the same spot.
11. OTHER GENERAL USES
WARNING: Before cleaning the surface,
always do a test on a hidden part and see
how it reacts to the application of steam.
11.1 BRIGHTENING UP CURTAINS AND DRA-
PES
Mites and dust can be removed from curtains
and drapes by steaming the fabric with just
the handle. The steam is able to remove
odours and brighten up colours, allowing the