Nokia c2-00 Service Manual page 28

Page 2 – 8
MJ-300
Module jig MJ-300 can be used for flashing via USB and RF, battery and
system testing.
The main functions are:
• Powering with external power
• CU-4 interface adapter to phone (requires SS-227)
• WLAN/BT/GPS RF-interfaces with probes
• GSM/WCDMA RF-interfaces with probes
• BSI mode selector (Tabby and Lynx interface, selected with battery
cable)
• VBATT interface (Tabby and Lynx interface, selected with battery
cable)
• CA-128RS cable is used together with this jig for RF testing
PK-1
PK-1 is a hardware protection key with a USB interface. It has the same
functionality as the PKD-1 series dongle.
PK-1 is meant for use with a PC that does not have a series interface.
To use this USB dongle for security service functions please register
the dongle in the same way as the PKD-1 series dongle.
RJ-230
RJ-230 is a soldering jig used for soldering and as a rework jig for the
engine module.
SRT-6
SRT-6 is used to open phone covers.
Note: The SRT-6 is included in the Nokia Standard Toolkit.
COMPANY CONFIDENTIAL
Copyright © 2011 Nokia. All rights reserved.
Service Tools and Service Concepts
Module jig
Software protection
key
Soldering jig
Opening tool
RM-704
Issue 1