Wolf ICBIF15/S Use & Care Manual page 9

Hide thumbs Also See for ICBIF15/S:
Table of Contents

Advertisement

Available languages

Available languages

W O L F
F RY E R M O D U L E
B E F O R E U S I N G F O R T H E F I R S T T I M E
Clean your fryer module thoroughly with hot
water and a mild detergent. Rinse and dry with
a soft cloth. This removes any residual oil and
grease left on the surface from the manufac-
turing process.
Refer to Care Recommendations on page 15.
Apply a stainless steel polish to protect the
finish and add luster.
During the initial period of use, you may smell
a light burning odor or see light smoke. Both
these conditions are normal with a new fryer
module.
Oil must be added to the fryer basin
before turning the unit on. Serious injury
or damage to the fryer module may
result when pouring oil into a heated
fryer basin.
Do not use abrasive cleaners; they will
permanently scratch the surface.
10
F RY E R M O D U L E
U S E & C A R E
O P E R A T I O N
Preheat indication
(back-lit with LED when
in Preheat mode)
Temperature
LED display
Temperature indication
(back-lit with LED when
at temperature)
Melt indication
(back-lit with LED when
in MELT mode)
M O D E S
O F O P E R A T I O N
L O C K M O D E
In Lock mode, all touch pad operations on
the control panel are disabled and the heating
element is deenergized. A steady glowing light
in the
touch pad indicates that the unit
is locked. Refer to the illustration below for
location of the
To lock the control panel, touch and hold
the
symboll for 3 seconds. The unit
will beep three times and the light in the
touch pad will illuminate. The
control unit is now in Lock mode.
To unlock the control panel, touch and hold
the
symbol for 3 seconds. The unit
will beep twice and the light in the
touch pad will go out. The control unit is
now in Idle mode.
IMPORTANT NOTE: When the unit is powered
up for the first time or if there has been a
power outage, the fryer module will default to
Lock mode.
I D L E M O D E
After unlocking the control panel as described
in Lock Mode, the unit enters the Idle mode of
operation. The valid touch pad operations are
,
, "+" or "–" and the Lock
mode
.
Power indicator
bar graph
Lock "key"
touch pad
Touch control panel
touch pad.
Temperature
Timer LED
adjustment
display
OFF ON
CLEAR
touch pad
touch pad

Advertisement

Table of Contents
loading

Table of Contents