On/Off Time - NEC AccuSync PV32 User Manual

On/Off Time

The off timer automatically switches the set to standby after a
preset time.
Press the MENU button and then
menu.
G D
Press the button and then
Time.
G D
Press the button and then
To cancel Off/On Time function, press the
Off.
G
Press the button and then use
G D
Press the button and then
Only for the On Time function; Press the
button to adjust volume level and channel number.
Repeatedly press the MENU button to return to normal TV viewing.
NOTE:
In the event of power interruption (disconnection or power failure)
the clock must be reset.
Two hours after the set is switched on by the On Time function it
will automatically switch back to standby mode unless a button is
pressed.
Once the on or off time is set, these functions will operate daily at
the preset time.
Off Timer function overrides On Timer function if they are set to the
same time.
The set must be in standby mode for the On Timer to work.
D E
/
button to select the TIME
E
/ button to select Off Time or On
E
/ button to select On.
D E
/ button to select
D E
/ button to select DTV or TV.
E
/ button to adjust the hour / minute.
G D
button and then
Basic Operation
E
/
English-31
- continued
TIME
Clock
Off Time
On Time
Auto Sleep
Time Zone
Daylight Saving
OK
TIME
-- :
Clock
DTV
Off Time
CH CADTV
On Time
VOL
Auto Sleep
Off
Time Zone
Daylight Saving
OK MENU
MENU
-- AM
2-1
30