off the silent mode, press power button on the front panel: the silent mode
will be turned off, and the device will emit beeps every 8 seconds. Press the
power button again to enable the silent mode.
3.
Under back-up mode, when battery voltage is too low, the UPS will emit
alarm; the UPS will turn off itself automatically afterward.
4.
In DC mode, UPS supplies power for the external device till battery runs out,
and then turns off. UPS turns on again when AC power mains recover.
8.
Press and hold the power button for about 3 seconds to turn the device off. Then
unplug the device from power mains. Disconnect the UPS from the battery if it's
not going to be used for a long time.
LED DISPLAY AND AUDIBLE ALARM
Battery mode
STATUS
Normal (silent mode-
-default)
Normal
Low battery
O/P short circuit
Overload
AC mode
Normal
Overload
Charge the battery
automatically (UPS
off)
Owner's manual
Normal
Backup (red)
(blue)
OFF
Continuous
bright
OFF
Continuous
bright
OFF
Continuous
bright
OFF
Continuous
bright
OFF
Continuous
bright
Continuous
OFF
bright
Continuous
OFF
bright
2 quick fla-
OFF
shes every
2 seconds
Overload
ALARM
(żółta)
OFF
OFF
OFF
Beeps eve-
ry 8seconds
OFF
eeps every
1seconds
OFF
OFF
Flash
Continuous
every 1
beeping
second
OFF
OFF
Flash
Continuous
every 1
beeping
second
OFF
OFF
EN