Pioneer avic-d1 Service Manual page 222

1
-
Removing the Monitor Assy
1
A
Remove the two screws. (Fig.2)
B
(2) Remove the screw to remove the Cover.
Do not pull the connecting flexible cable. (Fig.3)
C
(3) Remove the flexible cable from the connector to
remove the Monitor Assy. Push the lid of the c
up with the top of precision screwdriver (minu
and then remove the flexible cable. Take much
not to pull the connector forcedly or break it o
because it is easy to be damaged. And also, u
precision screwdriver in the same way in the
installation. (Fig.3)
D
E
F
222
1
2
AVIC-D1/UC
2
3
1
3
4
Fig.2
ver
Fig.3
4