Pioneer avic-d1 Service Manual page 169

5
EDC1
mode
0000 0000
Layer 0 Layer 1
selected selected
0000 0000
1003 0000
Layer0:10** ****
ID
Layer1:11** ****
designation
** ****: ID specification value
Layer0:20** ****
EDC1 start
Layer1:21** ****
** ****: Present ID value
F-close and F-search cannot be executed, unless LD-ON is set.
[If F-close isn't executed within 9 seconds after LD-ON, it switches to LD-OFF automatically.
And even if F-search is executed within 9 seconds after LD-ON, it also switches to LD-OFF.]
Please carry out F-close after carrying out power-off at once and carrying out power-on again,
when carrying out F-close after performing F-search.
The track number designation is selected from the track numbers already prepared for selection.
Switching to cyclic operation is made at step 1, and the decision is finalized (entered) in step 3.
For CD: Tracks 1, 4, 10, 11 and 32.
For DVD: Tracks 1, 4, 10, 11, 32, 64 and 100.
Method for designating an ID address:
•
through commands 1 and 2
Display
Error Code List
Error status from
DVD microcomputer Contents
0X50 Mecha. error
0X40 No disc
0X30
0X20 Read error
0XE2 Non-playable disc
0X90 Different region disc
0XFF Undefined error
Error Code Contents
0X99 Data cannot read
0X80 The address cannot be found Please confirm the disc
0X90 Focus error
0X91 Spindle lock NG
0X92 Carriage home NG
0X93 FOK error
0X94 ID/Subcode cannot be read
0X95 High spindle rotation
0X96 Row spindle rotation
0X98 TOC cannot be found
0X9A AV chip error
0X9B RecaveryNG(BE)
Play state error
0X9C
0X9D
Disc data error
0X9E Serface error
(Disc distinction is improper)
5
6
EDC2
mode
Layer 0
selected
0000 0000
0100 0000
1003 0000
1103 0000
ID
designation
EDC2 start
Display
No display
No display
Thermal Protection in Motion
Error-02-XX
NON-PLAY AY A ABLE DISC YABLE DISC Y
Error-FF
)
Display
Please confirm the disc
Please confirm the disc
DVD is stopping because mechanism detected abnormality
DVD is stopping because mechanism detected abnormality
Please confirm the disc
Please confirm the disc
DVD is stopping because mechanism detected abnormality
DVD is stopping because mechanism detected abnormality
Please confirm the disc
DVD is stopping because mechanism detected abnormality
DVD is stopping because mechanism detected abnormality
AVIC-D1/UC
6
7
0000 0000
Layer 1
selected
0100 0000
1103 0000
Layer0:10** ****
Layer1:11** ****
** ****: ID specification value
Layer0:20** ****
Layer1:21** ****
** ****: Present ID value
and LEFT. Numerical UP/DOWN operations are performed
3.
7
8
A
B
C
D
E
F
169
8