NEC MultiSync LCD1980SX LCD1980SX LCD1980SX User Manual page 20

OSM Rotation
Resolution Notifier
Factory Preset
Tag8 Sync Threshold
(Analog input only)
Tag9 Display Mode
Monitor Info
To switch OSM between Landscape and Portrait modes. Press "+" or "-" to select.
The optimal resolution is 1280 x 1024. If ON is selected, a message will appear on the
screen after 30 seconds, notifying you that the resolution is not set to 1280 x 1024.
Press "+" or "-" to select.
Selecting Factory Preset allows you to reset all OSM control settings (BRIGHTNESS,
CONTRAST, IMAGE CONTROLS, COLOR CONTROL SYSTEM, SHARPNESS,
EXPANSION MODE, OFF TIMER, OSM POSITION, OSM TURN OFF, DISPLAY MODE)
back to the factory settings. Highlighting the control to be reset and pressing the RESET
button can reset individual settings.
Press "SELECT" to reset.
Adjusts the slice level of a synchronization signal manually.
Press "SELECT" to move the adjustment mode, and press "+" or "-" to adjust.
Provides information about the current display resolution and technical data, including the
preset timing currently being used and the horizontal and vertical frequencies. Increases
or decreases the current resolution. Press "SELECT" to move the adjustment mode, and
press "+" or "-" to adjust.
Indicates the model and serial numbers of your monitor.
English-18