NEC MultiSync LCD1980SX LCD1980SX LCD1980SX User Manual page 18

Tag4 Auto
(Analog input only)
H. Position
V. Position
H. SIZE (OSD
ROTATION:
Landscape)
or V. SIZE (OSD
ROTATION: Portrait)
(Analog input only)
Fine
(Analog input only)
Tag5 Gamma Selection
Gamma Offset
Tag6 Color Control
Automatically adjusts the Image Position and H. Size (or V. Size) settings and Fine settings.
Press "SELECT" to activate Auto Adjustment.
Controls Horizontal Image Position within the display area of the LCD.
Press "+" or "-" to adjust.
Controls Vertical Image Position within the display area of the LCD.
Press "+" or "-" to adjust.
Adjusts the horizontal (or vertical) size of the screen.
If the "Auto Adjust function" do not give you a satisfactory picture setting, a further tuning
can be performed manually using the "H. Size (or V. Size)" function (dot clock). For this
a Moiré test pattern could be used. This function may alter the width of the picture. Use
left/Right Menuto center the image on the screen. If the H. Size (or V. Size) is wrongly
calibrated, the result would look like on then left drawing. The image should be
homogeneous.
When H. SIZE value is wrong. When H. SIZE value is improved. When H. SIZE value is correct.
Improve focus, clarity and image stability by increasing or decreasing this setting.
If the "Auto Adjust function" do not give you a satisfactory picture setting, a fine tuning can
be performed manually using the "Fine" function. It improves focus, clearity and image
stability by increasing or decreasing this setting. For this a Moiré test pattern could be
used. If the Fine value is wrongly calibrated, the result would look like on the left drawing.
The image should be homogeneous.
When FINE value is wrong.
Allows you to manually select the brightness level of gray-scale. There are five selections.
NO CORRECTION, 2.2, S-CURVE, PROGRAMABLE and CUSTOM.
S-CURVE: This setting is recommended for Video source. Grey area looks much brighter
than NATIVE setting.
PROGRAMABLE: The brightness of Grey-scale is changed as you like by using the
application, which can be downloaded from our Web site (http://www.necmitsubishi.com).
CUSTOM: The gamma value is selected from the rate of 0.5 to 4.0 by 0.1 step.
When the COLOR PRESET is sRGB, the value is fixed at 2.2 then NOT ADJUSTABLE.
Adjusts the black level and is performed for both analog and digital signals.
BLACK LEVEL is effective only when the signal is analog.
GAMMA OFFSET digitally adjusts the black level after the signal is converted
from analog to digital.
Six colours for the desired colour setting (sRGB and NATIVE colour presets cannot
be changed).
Colour temperature increases or decreases in each preset. Press "
colour. Press "+" or "-" to adjust. Press "SELECT" to customize.
R,Y,G,C,B,M,S
Increases or decreases Red, Yellow, Green, Cyan, Blue, Magenta and Saturation
depending upon which is selected. The change in colour will appear on screen and the
direction (increase or decrease) will be shown by the colour bars. Press "+" or "-" to adjust.
NATIVE
Original colour presented by the LCD panel that is not adjustable.
English-16
When FINE value is correct.
" or " " to select