NEC MultiSync LCD1980SX LCD1980SX LCD1980SX User Manual page 19

Tag7 Sharpness
Expansion Mode
Video Detect
DVI Selection
Off Timer
Language
OSM Position
OSM Turn off
OSM Lock Out
This is a digital capability for keeping a crisp image at all signal timings. It continuously
adjusts to maintain a distinct or soft image as you prefer, and is set independently
according to different timings.
Press "+" or "-" to select.
Sets the zoom method.
FULL: The image is expanded to 1280 x 1024, regardless of the resolution.
ASPECT: The image is expanded without changing the aspect ratio.
OFF: The image is not expanded.
CUSTOM1: Zoom with center fixed. The image is expanded from the rate of 1.0 to
3.0 times individually for horizontal (H. EXPANSION) and vertical (V. EXPANSION)
direction by 0.1 step.
CUSTOM2: Zoom with top left corner fixed. The image is expanded from the rate of 1.0 to
3.0 times individually for horizontal (H. EXPANSION) and vertical (V. EXPANSION)
direction by 0.1 step.
Selects the method of video detection when more than one computer is connected.
Press "+" or "-" to select.
FIRST DETECT: The video input has to be switched to "FIRST DETECT" mode. When
current video input signal is not present, then the monitor searches for a video signal from
the other video input port. If the video signal is present in the other port, then the monitor
switches the video source input port to the new found video source automatically. The
monitor will not look for other video signals while the current video source is present.
LAST DETECT: The video input has to be switched to the "LAST DETECT" mode. When
the monitor is displaying a signal from the current source and a new secondary source is
supplied to the monitor, then the monitor will automatically switch to the new video source.
When current video input signal is not present, then the monitor searches for a video
signal from the other video input port. If the video signal is present in the other port, then
the monitor switches the video source input port to the new found video source
automatically.
NONE: The Monitor will not search the other video input port unless the monitor is
turned on.
This function selects the DVI input mode (Input 1). When the DVI selection has been
changed, you must restart your computer. Press "+" or "-" to select.
AUTO: By using the DVI-D to DVI-D cable, the DVI SECTION is DIGITAL.
By using the D-SUB to DVI-A cable, the DVI SECTION is ANALOG.
DIGITAL: DVI digital input is available.
ANALOG: DVI analog input is available.
Monitor will automatically turn off after the preset time period from power on with the
ON/OFF function. When you select "ON", press "SELECT" and "+" or "-" to adjust.
OSM control menus are available in seven languages. Press "+" or "-" to select.
You can choose where you would like the OSM control image to appear on your screen.
Selecting OSM Location allows you to manually adjust the position of the OSM control
menu left, right, down or up. Press "SELECT" to move the adjustment menu, and press
"+" or "-" to adjust.
The OSM control menu will stay on as long as it is in use. In the OSM Turn Off submenu,
you can select how long the monitor waits after the last touch of a button to close the
OSM control menu. The preset choices are 10, 20, 30, 45, 60 and 120 seconds.
Press "+" or "-" to select.
This control completely locks out access to all OSM control functions except BRIHTNESS
and CONTRAST. When attempting to activate OSM controls while in the Lock Out mode,
a screen will appear indicating the OSM controls are locked out. To activate the OSM Lock
Out function, press "+" key, then SELECT and hold down simultaneously. To deactivate the
OSM Lock Out, press "+" key, then SELECT and hold down simultaneously.
English-17