3. Disassembly and Reassembly
MAGNETRON, MOTOR ASSEMBLY, VENT BLOWER AND HIGH VOLTAGE TRANSFORMER
Oven must be removed from wall.
REMOVING OVEN FROM WALL ( PEOPLE REQUIRED)
Oven is hooked on metal tabs at bottom of wall mounting plate and to cabinet by (3) top cabinet bolts .
3-1 Replacement of High Voltage Transformer
Parts
Grille
Panel Outer
Explaination Photo
8
Explaination
1.
Disconnect oven power .
.
Remove Grille .
1) Remove 2 screws
) Slide the Grille to the left, then pull it
straght out .
3.
Remove Panel Outer .