NEC MultiSync LCD1525M LCD1525M LCD1525M User Manual page 14

Rotate (raster rotation): Rotates the entire display clockwise or
counterclockwise.
Tools 1
Moiré Canceler: Moiré is a wavy pattern which can sometimes appear
on the screen. The pattern is repetitive and superimposed as rippled
images. When running certain applications, the wavy pattern is more
evident than in others. To reduce moiré, adjust the level by using –/+
control buttons.
Basic Convergence: Aligns all three colors (R,G,B) to form a single
color (white). The purpose of this control is to ensure that a white line
drawn on the screen is as crisp and clear as possible.
• Use the Horizontal control to adjust the alignment of the white lines in
the up/down direction.
• Use the Vertical control to adjust the alignment of the white lines in
the left/ right direction.
Corner Correction: Allows you to adjust the geometry of the corners of
your display – Top, Top Balance, Bottom or Bottom Balance.
GlobalSync Control: Eliminates picture impurities that may result from
the earth's magnetic field. While in the sub-menus (TOP LEFT, TOP
RIGHT, BOTTOM LEFT or BOTTOM RIGHT), use the –/+ control
buttons to fine tune the GlobalSync corrections.
Note: NEC recommends that you perform GlobalSync correction
while running a typical application such as a spreadsheet or
text document.
Auto Save: The monitor automatically saves the last settings of the user
controls. You can turn this Auto Save feature off by selecting this menu
and changing the off position. When the off mode is selected, you will
prompted with the option to save or return to the previous setting once
you select a different control. If the save is not confirmed, the setting will
go back to the previous setting when OSM is turned off.
Factory Preset: Selecting Factory Preset allows you a reset most OSM
control settings back to the factory settings. A warning statement will
appear to confirm that you do want to reset ALL settings. Individual
settings can be reset by high-lighting the control to be reset and
pressing the RESET button.
English-6