Haier LE32A650CF Instruction Manual page 18

Using Your TV
MHEG PIN Protection
Turn this setting on to enable MHEG PIN Protection
function.
Time Setup
To adjust time and timer settings.
Time Zone
To select your time zone.
Time
Auto Synchronization
Select On to automatically synchronise date and
time with a digital signal (if available). Select Off
to manually adjust the date and time.
Date
Press / and number buttons to set the date.
Time
Press / and number buttons to set the time.
Timer Power On
To automatically turn the TV on at a preset time.
Timer
When the power on timer is turned on, press
and number buttons to set the power on time.
Power On Channel
When the power on timer is turned on, select the
power on channel from the channel list.
Timer Power Off
To automatically turn the TV off at a preset time.
Timer
When the power off timer is turned on, press
and number buttons to set the power off time.
Sleep Timer
To automatically turn the TV off after a set
amount of time.
Auto Sleep
To automatically turn the TV off if there is not any
operation after a set amount of time.
Subtitle
To adjust the subtitle settings.
Analogue Subtitle
To turn analogue subtitle on or off. Select Mute
to turn analogue subtitle on when the TV is
muted.
Digital Subtitle Language
To select digital subtitle language.
Digital Subtitle 2nd Language
To select second digital subtitle language.
EN-16 LED Backlit Flat TV Instruction Manual
Subtitle Type
To select digital subtitle type.
Teletext
To adjust teletext settings.
Digital Teletext Language
To select digital teletext language
Decoding Page Language
To select teletext decoding page language.
Common Interface
To check the information of the CAM inserted to the
COMMON INTERFACE slot on the back of the TV.
OAD (Over Air Download)
To update TV software by air.
Manual OAD Download
To manually update TV software by air. Follow the
on-screen instructions to complete the software
update.
Auto Download
Select Yes to enable your TV to download new
software by air automatically
/
Auto Install
Select Yes to enable your TV to install new
software by air automatically
Version Info
To check software version information.
System Information
To check system information.
/
Reset Default
To reset picture, audio, channel and user settings to
the factory defaults.
CEC Menu
To adjust CEC settings.
CEC function
To turn CEC function on or off.
Auto turn off
When this option is set to On, the CEC device will
automatically power off when the TV is turned
off.
Device Discovery
Check if your device is connected and supports
CEC.
Standby (When CEC device is connected)
To turn the selected CEC device off.