Haier LE32A650CF Instruction Manual page 12

Getting Started
Note Note
• During the initial setup, if the TV is powered off before
a password is set, a new password must be set from the
Lock menu. Enter the default password-1234 to access
the Lock menu, then change the password. See
"Change Password" on page 17 for more information.
6.
Press / to highlight your tuner mode, then
press to continue.
Initial Setup
Please select your tuner mode:
Back Select
7.
Press / to highlight Scan, then press
the channel scan.
Initial Setup
First, please connect antenna.
Start channel scan now?
If you skip this step, the channel scan could be performed in Menu.
Back Select
If the tuner mode is Cable, press
number buttons to configure the cable
information, then press OK to start the channel
scan.
Initial Setup
Please configure the cable info.
Scan Mode
Frequency (KHz)
Modulation
Symbol Rate (Ksym/s)
Network ID
Select
EN-10 LED Backlit Flat TV Instruction Manual
Tuner Mode
Antenna
Cable
Next
to start
Channel Scan
Scan
Skip Scan
Next
/ / /
Advance
306000
Auto
Auto
Auto
Next
8.
Wait a while for the channel scan to complete.
Initial Setup
The channel scan may take a while to complete.
Status: Scanning...
Analogue Channels: 0
Digital Channels: 0
9.
When the channel scan is completed, press OK to
exit the wizard.
Initial Setup
Back
Note Note
• The initial setup process may vary depending on the
country you select. Follow the on-screen instructions
to complete the setup.
and
Channel Scan
Complete
Congratulations!!
Completed Initial Setup.
Please press [OK] to exit the wizard.
21%