Picture" Setting - Sony WEGA KV-SZ292 Operating Instructions Manual

x "Picture" setting
Press WEGA GATE and select "Settings".
Make sure the "Picture" icon (
then press .
"Picture Mode"
"Color Temperature"
"VM"
(Velocity Modulation)
"Intelligent Picture"
"Signal Level Indicator"
* You can adjust the setting to your personal preference in the "Picture Adjustment",
"Color Temperature" and "VM" options only when the "Custom" mode is selected (see
page 12).
) is selected,
Choose either "Vivid" (bright, contrast and sharp),
"Standard" (normal) or "Custom"*.
Adjust white color tint.
Choose either "Cool" (blue tint), "Neutral" (neutral tint) or
"Warm" (red tint).
Sharpen the edges of each object.
Choose either "High", "Low" or "Off".
Optimize picture quality.
Press V or v to select "On", then press
To cancel, select "Off", then press
Display the signal level when the "Intelligent Picture" is
functioning.
"Intelligent Picture Signal Level" indicator will be displayed,
followed by picture improvement when you change the
program number or the input mode.
red amber
(weak) (average)(fair ................. good)
Press V or v to select "On", then press
To cancel, select "Off", then press
still functioning.
Picture
Picture Mode:
Picture Adjustment
Color Temperature:
VM:
Intelligent Picture:
Signal Level Indicator:
Select
Confirm
.
.
green
.
. "Intelligent Picture" is
Vivid
Cool
High
On
On
End
continue
11 GB