Specifications - NEC MultiSync FE950+ FE950+ FE950+ User Manual

Monitor

Specifications

Picture Tube
Viewable Image Size:
Input Signal
Analog input:
Display Colors
Horizontal:
Synchronization
Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Horizontal:
Active Display Area
(Factory Setting)
Active Display Area
(Full Scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
950+.wpc
MultiSync ® FE
Monitor
Diagonal: 19 inch
18 inch
Radius: 50,000 mm
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colors
30 kHz to 96 kHz
Vertical: 50 Hz to 160 Hz
640 x 480 @ 50 to 160 Hz
800 x 600 @ 50 to 146 Hz
832 x 624 @ 50 to 141 Hz
1024 x 768 @ 50 to 116 Hz
1152 x 870 @ 50 to 103 Hz
1280 x 1024 @ 50 to 89 Hz
1600 x 1200 @ 50 to 76 Hz ................ NEC-Mitsubishi Electronics Display cites
356 mm/14.0 inches
Vertical: 267 mm/10.5inches
366 mm/14.4 inches
275 mm/10.8 inches
AC 100 – 120 V/220-240V, 50/60 Hz
1.5A @ 100-120 V/0.7A @ 220-240V
442 mm (W) x 448.6 mm (H) x 444.5 mm (D)
17.4 inches (W) x 17.7 inches (H) x 17.5 inches (D)
23 kg
50.7 lbs
+10°C to +35°C / +50°F to +95°F
Humidity: 30% to 80%
Feet: 0 to 10,000 Feet
-20°C to +60°C / -4°F to +140°F
Humidity: 10% to 90%
Feet: 0 to 45,000 Feet
NOTE: Technical specifications are subject to change without notice.
10
12
+ ™ Notes
950
90° deflection, 0.25 mm grille pitch,
medium short persistence phosphor,
aperture grille CRT, multi-layered, anti-static
screen coating, dark-tint screen and
OptiClear ® screen.
Depends on display card used.
Automatically
Automatically
Some systems may not support
all modes listed.
recommended resolution at 85 Hz for
optimal display performance.
Dependent upon signal timing used,
and does not include border area.
Dependent upon signal timing used,
and does not include border area.
1/2/01, 10:04 AM