Accessories; Standard Accessories; Optional Accessories; Applications - Hitachi D 13 Instruction Manual And Safety Instructions

English

ACCESSORIES

WARNING:

STANDARD ACCESSORIES

(1) Chuck Wrench (Code No. 930515) ...................................................................................... 1
(2) Side Handle (Code No. 956633) .......................................................................................... 1

OPTIONAL ACCESSORIES

(1) Handle Joint (Code No.930886)
(2) Depth Stopper (Code No.981655Z)
NOTE:
Accessories are subject to change without any obligation on the part of the HITACHI.

APPLICATIONS

Drilling holes on various metal, lumber and plastics.

PRIOR TO OPERATION

1. Power source
Ensure that the power source to be utilized conforms to the power source requirements
specified on the product nameplate.
2. Power switch
Ensure that the switch is in the OFF position. If the plug is connected to a receptacle while
the switch is in the ON position, the power tool will start operating immediately and can
cause serious injury.
3. Extension cord
When the work area is far away from the power source, use an extension cord of sufficient
thickness and rated capacity. The extension cord should be kept as short as practicable.
WARNING:
8
Accessories for this power tool are mentioned in this Instruction
Manual.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
....... sold separately
Damaged cord must be replaced or repaired.