Wiring Conversion - Danfoss TS715 Installation & User's Instructions

WIRING CONVERSIONS
Wiring conversions for other timeswitches which can be replaced with the
Danfoss TS715, refer to the second part of the table. If in any doubt, please
contact our Technical Services Department before proceeding with the
replacement.
DANFOSS RANDALL
TS715
The existing wallplate may be used when replacing the following, but the wiring mu
wire link between L & COM terminals of wallplate.
ACL LS111, LS711, LP111 & LP711
DRAYTON TEMPUS ONE & TEMPUS TWO
LANDIS & GYR RWB3
LANDIS & GYR RWB30
The TS75/TS15 wallplate must be used to replace the existing wallplate when repla
mains voltage systems, fi t wire link between terminal 1 & L of wallplate.
GRASSLIN 45, 45A, 45E
HONEYWELL ST6100
HORSTMANN 423 PEARL, EMERALD & TOPAZ
HORSTMANN KMK2A YMK2
HORSTMANN 425 CORONET
DANFOSS RANDALL 911
DANFOSS RANDALL 103, 103E, 103E5 & 103E7
RANDALL 3020
DANFOSS RANDALL SET1
RANDALL TSR2
PEGLER SUNVIC SP20 & SP25/30
POTTERTON MYSON EP4001
6
MAINS
N L
N L
N L
N L
N L
N L
2 1
N L
N L
3 4
N L
N L
5 6
1,7 6
N L
3 2
N L
N L