Philips NT9105 Instruction Manual page 19

Trimming nose hair
Make sure your nostrils are clean.
Carefully insert the cutting element into one
1
of your nostrils.
Do not insert the cutting element more than
0.5cm into your nostrils.
Slowly move the appliance around to remove
2
all unwanted hairs in your nostrils (Fig. 9).
Trimming ear hair
Make sure your outer ear channels are clean and
free from wax.
Slowly move the cutting element along the
1
rim of the ear to remove hairs that stick out
beyond the rim (Fig. 10).
Insert the cutting element into the outer ear
2
channel.
Do not insert the cutting element more than
0.5cm into your ear channel, as this could damage
the eardrum.
18