Page 1
CONTROLLED 8458-5108001-021 Rev. 2 2012-3-23 Mar. 26, 2012 CorelDRAW X4 , 2,20,41,62 60318 DO NOT RETURN THIS PRODUCT TO THE STORE. OPERATING, ASSEMBLY, PARTS, SEVICE QUESTIONS? CALL 1-800-377-5888 (USA), 1-800-561-0004 (CNA) BETWEEN 7:30 AM - 4:30 PM EST FOR ASSISTANCE.
Page 4
WARNING: The batteries in this product may contain one or more of the following chemicals known to the State of California to cause cancer and birth defects or other reproductive harm: lead, nickel, cadmium, lithium, cobalt. Wash hands after handling. WARNING: Some dust and debris created by the use of this tool could contain chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Page 5
Stop the lawn mower, release the drive control bar and the switch control bail wire.
Page 8
..7 in. front, 8 in. rear 3,250 43.6 kg (96 lb) Drive Speed ............2-2.2 mph MOTOR/BLADE CONTROL SWITCH CONTROL ASSEMBLY BAIL WIRE DRIVE CONTROL BAR SWITCH...
Page 9
allows the blade to cut and recut the grass for finer clippings . DRIVE CONTROL BAR Used to engage power-propelled forward motion of lawn mower. 1-800-377-5888 (USA), 1-800-561-0004 (CNA) for assistance.
BATTERY CAPACITY INDICATOR CHARGING WHEN BATTERY REMOVED FROM MOWER Insert the charger connector into the receptacle on the battery case.
Page 13
Push battery release button forward. Lift battery handle. Push the button on switch box and hold to allow access Remove battery. to the switch control bail wire . To Re-install Battery Assembly bail wire toward the mower handle and let go of the switch button Continue to hold the switch Place battery assembly into the battery compartment control bail wire against the mower handle as you mow.
If environment is dusty,also wear a dust mask. battery is removed from the battery compartment and the switch key is removed. REPLACING THE CUTTING BLADE See Figures 12 - 13. NOTE: Only use identical replacement blades. Stop the motor and remove the switch key. Allow blade to come to a complete stop.Remove battery from the battery compartment.
HUBCAP Remove battery from the battery compartment. SELF-LOCKING NUT self-locking nut from the wheel axle,then remove the wheel. wheel and install new self-locking nut securely. WHEEL AXLE WHEEL Fig.16 HANDLE KNOBS UPPER HANDLE LOWER HANDLE Fig.17...
Page 18
Mower loss of drive or slowing of drive speed Check/ replace drive belt. Check/reinstall drive belt. Replace drive cable. Stop the motor, Remove battery and inspect for damage. Have repaired by an authorized service center before restarting. 1-800-377-5888 (USA), 1-800-561-0004 (CNA)
Page 21
Call us first with questions about operating or maintaining your lawn mower at 1-800-377-5888 (USA), 1-800-561-0004 (CNA) between 7:30 a.m. - 4:30 p.m. Eastern Standard Time, or send emails to earthwise@reelin.com.
Page 22
60318 nearest you, please call 1-800-377-5888 (USA), 1-800-561-0004 (CNA) or visit us online at www.reelin.com/earthwise 60318 1-800-377-5888 (USA) 1-800-561-0004 (CNA) www.reelin.com/earthwise 11/15/11(REV:00)