Multisync 95F - NEC MultiSync 75F User Manual

Monitor Specifications
Picture Tube
Viewable Image Size:
Input Signal
Display Colours
Synchronization Range
Resolutions Supported
Resolution based on horizontal and
vertical frequencies only
Active Display Area
(Factory setting)
Active Display Area
(Full scan)
Power Supply
Current Rating
Dimensions
Weight
Environmental Considerations
Operating Temperature:
Storage Temperature:
NOTE: Technical specifications are subject to change without notice.

MultiSync 95F

Diagonal: 48.3 cm (19 inch)
45.8 cm (18 inch)
Video: ANALOG 0.7 Vp-p/75 Ohms
Sync: Separate sync. TTL Level
Horizontal sync. Positive/Negative
Vertical sync. Positive/Negative
Composite sync. (Positive/Negative) (TTL Level)
Unlimited number of Colours
Analog input:
Horizontal: 31 kHz to 96 kHz
Vertical: 55 Hz to 160 Hz
640 x 480 @ 60 to 160 Hz
800 x 600 @ 55 to 153 Hz
832 x 624 @ 55 to 144 Hz
1024 x768 @ 55 to 120 Hz
1152 x 875 @ 55 to 105 Hz
1280 x 1024 @ 55 to 89 Hz
1600 x 1200 @ 55 to 76 Hz
Horizontal:
356 mm
Vertical:
267 mm
366 mm
274 mm
AC 100 - 240V, 50 – 60 Hz
2.2 A @ 100 - 240V
444 (W) x453 (H) x455 (D) mm
22.0 kg
0 °C to +35 °C
30% to 80%
Humidity:
0 to 3000 m
Altitude:
-20 °C to +60 °C
10% to 90%
Humidity:
0 to 13700 m
Altitude:
English-16
Notes
90° deflection, 0.25 mm trio
dot pitch, medium short
persistence phosphor,
multi-layered, anti-static
screen coating, semi-tint
screen, Invar Shadow Mask
and OptiClear screen.
Depends on display card
used.
Automatically
Automatically
Some systems may not
support all modes listed.
NEC-Mitsubishi Electronics
Display cites recommended
resolution at 85 Hz for
optimal display performance.
Dependent upon signal
timing used, and does not
include border area.
Dependent upon signal
timing used, and does not
include border area.