Object Detection - Mercedes-Benz Comand Operating Instructions Manual

Rear view camera
48
Press the Ø button.
X
or
Press Vehicle
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
To select System
X
the controller.
To select 360°
X
controller.
The 360° Camera
Select Activation by R
X
The function is switched on O or off ª,
depending on the previous status.
Opening the camera cover for clean-
ing
To select Open Camera Cover
X
camera menu: turn the controller and press to
confirm.
The Please Wait...
approximately three seconds.
The camera cover opens.
The camera cover closes automatically if:
the ignition is switched off
R
the vehicle exceeds a moderate speed
R
Rear view camera
General notes
The rear view camera covers the immediate sur-
roundings of the vehicle and assists you when
parking.
The rear view camera is only an aid. It is not a
replacement for your attention to your immedi-
ate surroundings. You are always responsible
for safe maneuvering and parking. When maneu-
vering or parking, make sure that there are no
persons, animals or objects in the area in which
you are maneuvering.
You can find further information about the rear
view camera in the vehicle Operator's Manual.
in the main function bar.
Settings: turn and press
Camera: turn and press the
menu appears.
gear.
in the 360°
message appears for
Switching the rear view camera auto-
matic mode on/off
This function activates the rear view camera
when reverse gear is engaged.
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
Slide 6 the controller.
X
To select System Settings: turn and press
X
the controller.
Select Rear View Camera.
X
The Rear View Camera
Select Activation by R
X
The function is switched on O or off ª,
depending on the previous status.
When you start the vehicle and engage
reverse gear, the camera cover opens auto-
matically if the function is activated. The area
behind the vehicle is shown with guide lines in
the display (see the vehicle Operator's Man-
ual).
For further information on the rear view camera
(see the vehicle Operator's Manual).

Object detection

The rear view camera can detect moving and
stationary objects. If, for example, a pedestrian
or another vehicle is detected, these objects are
marked with bars. The system is able to detect
and mark stationary objects when your vehicle
is moving. Moving objects will always be detec-
ted and marked.
Switching object detection on/off
To select Object Detection
X
camera menu: turn and press the controller.
The function is switched on O or off ª,
depending on the previous status.
Opening the camera cover for clean-
ing
To select Open Camera Cover
X
view camera menu: turn and press the con-
troller.
The Please Wait...
approximately three seconds.
menu appears.
gear.
in the rear view
in the rear
message appears for