Settings - Mercedes-Benz Comand Operating Instructions Manual

You can find further information on the locking
feature in the vehicle Operator's Manual.
Setting the delayed switch-off time
Interior lighting delayed switch-off
The interior lighting is activated for the duration
of the delayed switch-off time when the Smart-
Key is removed from the ignition lock.
Call up Vehicle Settings
X
To select Interior Lighting Delayed
X
Switch-off: turn and press the controller.
The setting element is active.
To change the delayed switch-off time: turn
X
the controller.
You can find further information on the interior
lighting in the vehicle Operator's Manual.
Exterior lighting delayed switch-off
If you switch on the Exterior Lighting
Delayed Switch-off
lighting is switched on for a short time after the
engine is switched off. The light switch must be
set to à (see the vehicle Operator's Manual).
The exterior lighting remains on for 60 seconds
after the engine is switched off. If you close all
the doors and the tailgate, the exterior lighting
switches off after the set time.
Call up Vehicle Settings
X
To select Exterior Lighting Delayed
X
Switch-off: turn and press the controller.
The setting element is active.
To change the delayed switch-off time: turn
X
the controller.
Activating/deactivating the trunk lid
opening height restriction
Activating the Trunk Opening-height
Restriction function allows you to avoid
bumping the trunk lid on a low garage ceiling, for
example. Setting via the multimedia system is
available for the Sedan and Coupe.
Call up Vehicle Settings
X
To select Trunk Opening-height
X
Restriction: turn and press the controller.
The function switches on or off, depending on
the previous setting.
( page 45).
Y
function, the exterior
( page 45).
Y
( page 45).
Y
360° camera
General notes
The 360° camera surveys the vehicle surround-
ings and assists you, for example when parking
or at exits with reduced visibility.
The 360° camera is only an aid. It is not a
replacement for your attention to your immedi-
ate surroundings. You are always responsible
for safe maneuvering and parking. Make sure
that no persons or animals are in the maneu-
vering range.
For more information on the 360° camera see
the vehicle Operator's Manual.
Displaying the 360° camera image
The 360° camera image can be displayed if:
your vehicle is equipped with a 360° camera
R
the 360° Camera function is switched on; see
R
the vehicle Operator's Manual
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select 360° Camera: turn and press the
X
controller.
The 360° camera image appears in split-
screen mode.
You will see the previous view on the display if,
when the function is switched on:
you turn the SmartKey to position 1 in the
R
ignition lock
you select transmission position P
R
when you are driving at moderate speeds
R
Switching the display off manually
To select &: slide 6 and press the con-
X
troller.
Switching the display on automatically
You can automatically switch the 360 camera
X
display using reverse gear (
Switching the 360° camera auto-
matic mode on/off
This function activates the 360° camera when
reverse gear is engaged.
360° camera
page 47).
Y
Z
47