NEC LCD4000e User Manual page 17

Nec electronics america multisync lcd monitor user's manual

Hide thumbs Also See for LCD4000e:

Table of Contents

Available languages

Connections

Connecting your Macintosh

computer to your LCD monitor will enable you to display your computer's screen image. Some video cards or

drivers may not display images correctly.

•

To connect the RGB 2 IN connector (mini D-sub 15 pin) on the LCD monitor, use the provided RGB signal cable (mini D-sub 15 pin to

mini D-sub 15 pin).

For older Macintosh

computers, use Macintosh cable adapter to connect to your Macintosh's video port.

NOTE: To obtain the Macintosh cable adapter call NEC-Mitsubishi Electronics Display of America, Inc. at (800) 632-4662

•

To connect the RGB 3 DVD/HD IN connector (BNC) on the LCD monitor, use the signal cable available separately (mini D-sub 15 pin to

BNC x 5).

•

If you use with a Macintosh PowerBook, set "Mirroring" to off.

Refer to your Macintosh's owner's manual for more information about your computer's video output requirements and any special

identification or configuring your monitor's image and monitor may require.

• The AUDIO IN 1, 2 and 3 can be used for audio input. For connection, select AUDIO 1, 2 or 3 from the AUDIO INPUT button.

–continued

Connecting to a Macintosh

English-13

Computer

Table of Contents