Basic Operation; Using The Remote Control - NEC LCD4000e User Manual

Basic Operation

The LCD monitor power indicator will turn green while powered on or red in off mode. The monitor can be powered on or off using the
following three options:
Power Button
Main Power Switch
–Power ON and OFF Modes
1. Pressing the power button.
NOTE: Before operating the remote control, be sure to turn
on the Main Power Switch on the LCD monitor.

2. Using the remote control

NOTE: Before operating the remote control, be sure to turn
on the Main Power Switch on the LCD monitor.
REMOTE CONTROLLER RU-M104
3. Pressing the Main Power Switch.
NOTE: When the Main Power Switch is used to power off
the LCD, the remote control and the power switch will not
activate the on mode. Be sure to turn the Main Power Switch
to the on mode before using these two options.
English-18