System Settings; Usb Menu - Labgear HDSR 260 Setup Manual

11 System Settings

Press the MENU key and select [System].
The menu provides options to change system
settings. Press the / keys to select an option and
press the / keys to change the setting. Press the
EXIT key to exit the Menu.
Set Password: To set or change the password, enter
your old password or the default password '000000' .
then you will be asked to enter your new password.
To confirm, re-enter your new password. Once it is
confirmed, press the EXIT key to exit the Menu.
Then your old password will be replaced with your
new password. Keep your password somewhere
safe or write down here
_________________
Restore Factory Default: To reset your Set Top Box
to the Default Factory Settings. In Main Menu, move the cursor to "System", select [Restore Factory Default] and press
the OK button. Enter your password or the default password '000000' and press OK to confirm. This option will delete
all your preset channels and settings and restore factory setting.
Information: View model, hardware and software information.
Recall List: On: The screen will show a table which includes the last ten programs watched, you can select programs
here. Off: The receiver will play the last program.
Software Update: There are two options, By USB: Update with the firmware loaded on to a USB device.
By OTA (over the air): When you choose this option, follow the on screen instructions

12 USB Menu

Press the MENU key and select [USB].
This menu diplays options to playback Music,
Photo and Video files, it supports MP3, WMA, JPEG,
BMP, AVI, MKV files ect..
The menu also offers options to adjust the
multimedia configuration.
The unit will only support USB devices with FAT
and FAT32 formatted media.
14 Customer Careline: 08457 573 479 (Local rate - UK Only) Technical Support: www.philex.com/support