Mio L130 series Quick Start Manual page 5

en
Installing the memory card and SAM/SIM card
1. Open the battery cover and remove the battery.
2. Follow the instruction below to install the cards (not supplied):
* For selected models only.
3. Replace the battery.
4. Replace the battery cover and turn both latches to the locked position to ensure the battery cover
is securely closed.
Notes:
• The device supports up to 32GB MicroSD memory cards. However, it does not guarantee the
device's compatibility with memory cards from all manufacturers.
• While installing a card, do not apply pressure to the centre of the card. Do not use your finger or
any metal objects to touch and scratch the contact part of the card.
• To remove a card, gently push the top edge of the card inwards to release it and then pull it out
of the slot.
4
a.
b.
c.
a. SAM (Secure Access Module) card*
b. MicroSD card
c. Micro SIM (Subscriber Identity Module) card*