Safety Instructions - Kärcher T 150 T-Racer Manual

Hide thumbs Also See for T 150 T-Racer:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 5
Please read and comply with these origi-
nal instructions prior to the initial opera-
tion of your appliance and store them for
later use or subsequent owners.

Safety instructions

 Please observe the safety in-
structions of your high-pres-
sure cleaner.
 Only trigger the high-pres-
sure jet at the high-pressure
gun if the T-Racer is located
on the surface to be cleaned.
 There must be no persons in
the immediate vicinity of the
cleaning head.
 Beware of the recoil! Ensure
a stable position and firmly
hold the high-pressure gun
with the extension tube.
 Upon completion of the
cleaning operation, switch off
the high-pressure cleaner.
When working on the T-Rac-
er, disconnect it from the
high-pressure gun as well.
 Maximum water temperature
40
(please observe the in-
structions for your high-pres-
sure cleaner).
Description of the Appliance
When unpacking the product, make sure that no acces-
sories are missing and that none of the package con-
tents have been damaged. If you detect any transport
damages please contact your dealer.
Illustration
1
Casing
2
Bayonet connection with union nut
3
Adapter
4
Extension tube
5
High pressure nozzle
6
Rotor arm
The T-Racer is ideally suited for the cleaning of floor
and wall surfaces made of different materials such as
wood, plastic, concrete, tiles, and natural stone. Use the
T-Racer for private households only.
The T-Racer can be used with the provided devices. For
the use with another device, the high-pressure nozzles
must be adapted to the high-pressure cleaner used.
High-pressure cleaner with nominal voltage (p)
lesser than 13 MPa (130 bar)
eg: K 2 – K 5, Kärcher 201 – Kärcher 560
 Use grey high-pressure nozzles.
High-pressure cleaner with nominal pressure (p) of
13 MPa (130 bar) to 16 MPa (160 bar)
e.g.: K 6 – K 7, Kärcher 600 – Kärcher 770
 Use yellow high-pressure nozzles.
Suitable KÄRCHER high-pressure nozzles can be pur-
chased in specialist shops.
Symbols on the machine
DANGER
Do not reach under the edge of the T-Racer
during operation!
– 1
EN
Proper use
5

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents