NEC NP600 User Manual page 75

Turning On the Projector By Applying Computer Signal [AUTO POWER ON(COMP1)]
When the projector is in Standby mode, applying a computer signal from a computer connected to the COMPUTER1
IN input will power on the projector and simultaneously project the computer's image.
This functionality eliminates the need to always use the POWER button on the remote control or the projector cabinet
to power on the projector.
To use this function, first connect a computer to the projector and the projector to an active AC input.
NOTE:
• Disconnecting a computer signal from the computer will not power off the projector. We recommend using this function in com-
bination of the AUTO POWER OFF function.
• This function will not be available under the following conditions:
- when a component signal is applied to the COMPUTER1 IN connector
- when a Sync on Green RGB signal or composite sync signal is applied
- when [POWER-SAVING] is selected for [STANDBY MODE]
Enabling Power Management [AUTO POWER OFF]
When this option is selected you can enable the projector to automatically turn off (at the selected time: 5min., 10min.,
20min., 30min.) if there is no signal received by any input or if no operation is performed.
Selecting Default Source [DEFAULT SOURCE SELECT]
You can set the projector to default to any one of its inputs each time the projector is turned on.
LAST. . ..................................Sets.the.projector.to.default.to.the.previous.or.last.active.input.each.time.the.projector.is.turned.
AUTO...................................Searches.for.an.active.source.in.order.of.COMPUTER1.→.COMPUTER.2(DIGITAL).→.COMPUTER2.
COMPUTER1.......................Displays.the.computer.signal.from.the.COMPUTER.1.IN.connector.every.time.the.projector.is.turned.
COMPUTER2(DIGITAL). . ......Displays.the.DVI.digital.from.the.COMPUTER.2.IN.connector.every.time.the.projector.is.turned.
COMPUTER2(ANALOG). . .....Displays.the.computer.signal.from.the.COMPUTER.2.IN.connector.every.time.the.projector.is.turned.
VIDEO..................................Displays.the.Video.source.from.the.VIDEO.IN.connector.every.time.the.projector.is.turned.on.
S-VIDEO..............................Displays.the.Video.source.from.the.S-VIDEO.IN.connector.every.time.the.projector.is.turned.on.
on.
(ANALOG).→.VIDEO.→.S-VIDEO.→.COMPUTER1.and.displays.the.first.found.source.
on.
on.
on.
66
5. Using On-Screen Menu