NEC NP600 User Manual page 29

Connectng to a Network
The projector comes standard with a LAN port (RJ-45) which provides a LAN connection using a LAN cable.
Using a LAN cable allows you to specify the Network Settings and the Alert Mail Settings for the projector over a LAN.
To use a LAN connection, you are required to assign an IP address to the projector on the [PROJECTOR NETWORK
SETTINGS] screen of the web browser on your computer. For setting, see page 41,42,43.
Example of LAN connecton
Example of wired LAN connection
2. Installation and Connections
Server
Hub
LAN cable (not supplied)
0
NOTE: Use a Category 5 or higher LAN cable.
LAN