Kärcher A 2204 User Manual page 7

Commissioning and operation
Description of the Appliance
When unpacking the product, make sure
that no accessories are missing and that
none of the package contents have been
damaged. If you detect any transport dam-
ages please contact your dealer.
Note: Please refer to page 2 for figures of the
appliance and the operation.
1 Carrying handle
2 ON/OFF switch for appliance
3 Blowing connection
4 Air regulation of the blowing function
5 Suction hose connection
6 Swivel casters
7 Accessory mount
8 Storage, power cord
9 Power cord with plug
Accessories
A Suction hose
B Suction tubes 2 x 0.5 m
C Floor nozzle with hard surface insert
D Crevice nozzle
E Filter bag
F Swivel casters
Start up
Illustration
Remove the motor casing and take acces-
sories out of the container.
Illustration
You will find the swivel casters in the con-
tainer. The swivel casters must be mount-
ed on the appliance.
Illustration
Connect accessories.
Illustration
Plug in the main plug.
Switch on the appliance using the ON/OFF
switch.
Operations
Always work with an inserted cartridge
filter - during wet as well as dry vacuum
cleaning!
Dry vacuum cleaning
Illustration
For a dust-free disposal of the vacuuming ma-
terial we recommend to insert the paper filter
bag as well. This provides the additional ad-
vantage that the cartridge filter will not become
contaminated that quickly.
Work only with a dry cartridge filter!
Therefore: Always let the cartridge filter
dry thoroughly before using it!
Added filter bags can burst!
Therefore: Change the filter bag at the ap-
propriate time!
Always use a filter bag while sucking in
fine dust!
Wet vacuum cleaning
Caution:
Do not use a filter bag!
Immediately switch the appliance off if foam
forms or liquids escape!
Note: If the container is full a float closes the
suction opening and the appliance works at a
higher speed. Switch off the appliance immedi-
ately and empty the container.
Blowing function
Use this function, for example, to blow out
leaves or dust from the garage, hobby room,
work shop, courtyard or garden.
Illustration
Connect connection hose. Open the slide
of the air regulation, and select the desired
blowing performance.
Finish operation
Illustration
Empty the container
Turn off the appliance and disconnect the
mains plug.
Remove the motor casing and empty the
container.
Illustration
Storing the Appliance
Place the accessories in the appropriate
compartments at the appliance and store
the appliance in a dry room.
7
English